On this page you will find all the different fishing techniques that are mostly commonly used – how they work and what is their impact on ocean life.
Pots and traps
Pots, traps or ‘creels’ include a variety of designs that take the form of cages or baskets with one or more openings or entrances, with or without bait. They are usually set on the seabed, either singly or in rows, and are connected by ropes (buoy lines) to buoys on the surface to show their position. Animals enter through a one-way opening and then can’t escape.
Hook-and-line is a general term used for a range of fishing methods that employ short fishing lines with hooks in one form or another (as opposed to longlines). It includes handlines, handreels, powered reels, rod/pole-and-line, drop lines, and troll lines, all using bait or lures in various ways to attract target species.
Longlines consist of short lines (called snoods) carrying baited hooks, attached at regular intervals to a longer main line that is suspended horizontally with the help of surface floats. Main lines can be over 150 km long and can carry several thousand hooks.
Longlines consist of short lines (called snoods) carrying hooks, attached at regular intervals to a longer main line that is laid on, or close to, the seabed. Main lines are up to 150 km long and can carry several thousand hooks.
Pelagic gillnets or ‘set nets’ are fine-filament nets that are kept at or below the surface by numerous floats and weights and held in position by anchors. If a fish’s head goes through the net but its body can’t follow, it is ‘gilled’ or entangled in the netting when it tries to get out. Gillnets are used either alone or in large numbers placed in a row.
Bottom gillnets or ‘set nets’ are fine-filament nets, the lower edge of which touch the seabed, and are held in place by numerous floats, weights and anchors. If a fish’s head goes through the net but its body can’t follow, it is ‘gilled’ or entangled in the netting when it tries to get out.
Fish are encircled by a large ‘wall’ of net, which is then brought together to retain the fish by using a line at the bottom that enables the net to be closed like a purse.
The front net sections are often made of very large meshes or ropes, which herd the fish towards the back of the funnel-shaped net. Pelagic trawls may be towed by one or two (pair trawl) boats.
These fishing nets are similar to a small trawl net, with a conical net bag and two relatively long wings. Two long heavy ropes, one attached to each wing, are used to encircle a large area of the seabed to herd the fish into the net and then to haul the net in.
Demersal otter trawls
This is a type of bottom trawl that has two rectangular 'doors' or 'otterboards' to keep the mouth of the funnel-shaped net open horizontally while the net is being towed. A vertical opening is maintained by weights on the bottom and floats on the top.
This is a type of bottom trawl in which the horizontal opening of the net is provided by a heavy beam mounted at each end on guides or skids that travel along the seabed. On sandy or muddy bottoms, a series of ‘tickler’ chains are strung between the skids ahead of the net to stir up the fish from the seabed and chase them into the net.
Similar to a beam trawl, a dredge consists of a rugged triangular steel frame and tooth-bearing bar, behind which a mat of linked steel rings is secured. A heavy netting cover joins the sides and back of this mat to form a bag in which the catch is retained.