フランスでは、原発部品データ捏造が発覚 日本の原発は、大丈夫？

Made in Japan in use in France, the insufficient strength is found in the primary parts.

And it became clear that French manufacturers had fabricated important safety data.

 (Source: From the data of the Nuclear Safety Authority of France)

The table above was submitted by the manufacturer to the Nuclear Regulatory Authority.

The table below is the manufacturer’s original data for the nuclear power regulatory body.

We padded the numbers of parts strength tests.

Why did it pass through French regulations when delivered to a power company that owns nuclear plants? One mystery shot. I was lying to the regulatory body.

What is the “strength shortage problem” in Japan?

When Japanese products were also delivered to the French nuclear plant, it was “accepted goods”. However, in France, we are inspecting other nuclear power plants as a result of the lack of strength of the components of the Framan Building Nuclear Power Plant under construction, and as a result we found a lack of strength in parts made in Japan.

That’s why you do not believe in the data written on the paper, but want to make sure by the inspection of the actual thing ?

Nuclear experts also said that “in-kind inspections are necessary”

Today, Greenpeace has registered a report of a power company possessing nuclear power plants in Japan that Japan regulatory agency said “no problem”, and materials of parts manufacturers in the past in the regulatory agencies of the UK and the International Atomic Energy Agency We announced the results analyzed by Dr. John Large, a nuclear energy consultant who had been doing.

Dr. Large may overlook the lack of strength if it relies on judgment from the manufacturing method or past records, as it is done in France, it is necessary to inspect the spot of parts , We conclude.

For details, please see the report .

Also in Japan, inspect the actual parts of parts suspected of insufficient strength!

Please do join us for signing “Inspection now”.

“Sign up now!” Signature>

Stop order in French nuclear plant due to Japanese manufacturer’s parts problem – What about Japan?
Sean Bernie interview article by Masana Atsuko  “French nuclear power plant stopped due to insufficient strength of steel made in Japan! What should the Nuclear Regulatory Commission of Japan do?”